Showing posts with label Auto Repair. Show all posts
Showing posts with label Auto Repair. Show all posts
Did you recently get your ride tinted? Not sure how to properly care for the films? Don’t worry, because here are some basic and simple instructions for you to follow in order to maximize the life of your automotive window films.
Before we get started, it is important for you to know that there will be a film dry-out time once the installation process has been completed. During the installation process, your friendly Solar Window Film dealer will remove as much of the mounting solution as possible, however, it is possible that a small amount will remain, causing small water bubbles to form and/or giving it a slightly cloudy look. However, you should not attempt to clean the film for 30 days after installation, as the water bubbles and the cloudy look will eventually dissipate.
Now that you are well aware of what happens after the installation phase, it is time for you to learn some tips on how to maximize the life span of your new automotive window films:
Before we get started, it is important for you to know that there will be a film dry-out time once the installation process has been completed. During the installation process, your friendly Solar Window Film dealer will remove as much of the mounting solution as possible, however, it is possible that a small amount will remain, causing small water bubbles to form and/or giving it a slightly cloudy look. However, you should not attempt to clean the film for 30 days after installation, as the water bubbles and the cloudy look will eventually dissipate.
Now that you are well aware of what happens after the installation phase, it is time for you to learn some tips on how to maximize the life span of your new automotive window films:
- It is crucial that you always use fresh clean soft materials to wash and dry your window film surfaces.
- Although most glass cleaners will work well, a recommended cleaning solution for window film is 1/2 ounce of liquid dish soap added to 1 quart of fresh water.
- A soft cloth or a clean synthetic sponge is recommended for washing the window film followed by another clean soft cloth for drying.
- In order to avoid scratching the film, do not use bristle brushes, abrasive scrubbing sponges or any cleaning materials that may have been contaminated with dirt particles. This includes using different cleaning materials to wash the interior and exterior windows.
- Though it might not seem like it, some brands of paper towels are coarse enough to cause fine lines of scratches in the film, even films with scratch resistant, protective hard coat finish. While these scratches may be too thin to be seen at the beginning, they can damage the polished look of the film over time.
*Disclaimer: DO NOT attempt to clean the film for 30
days after installation.
Go fast. Go safe. And go in style. This is the unconscious creed of all who consider car modifications. We don’t all seek renovations for the same reasons, but we are all considering modifications for the same underlying reason. We are drivers, mechanics, and dreamers who push our cars beyond the norm and into perfection. Regardless of your own reason for considering car mods, your car can benefit from window tint.
Block the glare from the sun that can make it difficult and dangerous to drive on the road.
Make your car more energy efficient by blocking the sun. This feature will keep your car cooler on hot summer days. A must have for cars whose air conditioning have seen better days.
Block 99% of the UV rays from the sun. This will protect the interior of your car from sun damage. This vital feature will prevent the paint, rubber, and plastic inside your vehicle from cracking and fading.
For those who are confident that they will be able to apply the window tint, I would recommend purchasing window tint that is applied with static cling technology instead of the adhesive. Static cling allows you to remove and reapply the window tint if you apply it improperly.
Window tint needs to be applied in a shaded, well-light, and dust-free area. It should be 40 to 98% F for three days after the installation. And you should not clean your vehicles windows with ammonia or house hold glass cleaners before you apply the tint. After you ensure that you fulfill these requirements, you can refer to this how-to video to guide you through the rest of the installation process.
As a car mod buff, you might want to consider window tint for your vehicle. Window tint will reduce the glare, heat and UV rays allowed into your vehicle. Just make sure you follow the state window tint laws and have the skill to apply the window tint. And remember, if you’re a night owl, you might want to forego this modification.
What is Window Tint?
Window tint is a combination of polyester and metalized coating. The window tint has a scratch resistant coating on one side, and a release liner on the other. Window tint is applied by removing the release liner and attaching the film to the windows with an adhesive or a static cling technology. Window tint can be used on both residential buildings and vehicles.Why Window Tint?
Car modifications should increase the safety, comfort, and aesthetic appeal of your vehicle. Window tint accomplishes all of this and more. Window tint can:Block the glare from the sun that can make it difficult and dangerous to drive on the road.
Make your car more energy efficient by blocking the sun. This feature will keep your car cooler on hot summer days. A must have for cars whose air conditioning have seen better days.
Block 99% of the UV rays from the sun. This will protect the interior of your car from sun damage. This vital feature will prevent the paint, rubber, and plastic inside your vehicle from cracking and fading.
Why Forego Window Tint?
Window tint is not without its downside. If you spend the majority of your time driving around after dark, you should not use this modification. The main problem is that the more effective the tint, the harder it will be for you to see through the window after dark.State Regulations of Window Tint
Before applying window tint, you need to check your state’s window tint regulations. In order to protect everyone on the road, states have set up laws that you must follow when applying window tint to your car. Failure to follow these laws can lead to a monetary fine and jail time. If you want to avoid both, you must check out what window tint guidelines you must follow. The state regulates:- How reflective a window tint can be and where reflective tint can be applied.
- How dark the window can be on certain parts of the vehicle.
- If you can use colored tint.
- If you must have enhanced side mirrors to go with your tint.
- Whether you need a sticker showing you window tint adheres to the law.
How Do I Tint My Windows?
Tinting your windows may seem simple, but a sub-par window tint job can be aesthetically disastrous. Improperly applied window tint can have unsightly bubbles and dirt trapped beneath the window tint. In order to prevent this I would recommend that any interested car owners, leave the tint jobs to the professionals.For those who are confident that they will be able to apply the window tint, I would recommend purchasing window tint that is applied with static cling technology instead of the adhesive. Static cling allows you to remove and reapply the window tint if you apply it improperly.
Window tint needs to be applied in a shaded, well-light, and dust-free area. It should be 40 to 98% F for three days after the installation. And you should not clean your vehicles windows with ammonia or house hold glass cleaners before you apply the tint. After you ensure that you fulfill these requirements, you can refer to this how-to video to guide you through the rest of the installation process.
As a car mod buff, you might want to consider window tint for your vehicle. Window tint will reduce the glare, heat and UV rays allowed into your vehicle. Just make sure you follow the state window tint laws and have the skill to apply the window tint. And remember, if you’re a night owl, you might want to forego this modification.
Once you’ve found the perfect car, you have to take steps to customize it to your unique personality and taste. You don’t need to spend thousands of dollars to customize your ride. Keep these five customization ideas in mind when planning what to do to make your new car truly your own.
1. Change the upholstery.
The interior of the car can be leather or a unique pattern on fabric. You’ll also want your seats to be comfortable to sit in while driving or for your guests when riding, Select from options including cloth, leather, faux leather, and suede to truly customize your ride.
2. Change the paint job.
Decals make your car stand out in a crowd, but they are temporary and do not look as sharp and professional as a paint job done at an auto body shop like the one my friend runs in West Chester, PA. They can also peel off once they’ve been on your vehicle for a while. Anyone can go buy a sticker and slap it on their vehicle, but getting a custom paint job takes dedication and love for the design. A few racing stripes, a logo or a design creates a unique look that is sure to stand out whether you’re in a tiny town or large city.
3. Get a custom license plate.
Getting a custom plate doesn’t cost too much money and it grabs the attention of anyone sitting behind you in traffic. It will also be easier to remember your license plate when you need to write it down on forms or identify it to someone. You have so many options when it comes to selecting a license plate.
4. Add aftermarket lights.
Lighting is versatile and can be added in the front, back or along the sides. Use brightly colored lights to highlight your car’s primary color. Don’t go too crazy on the lights though. If you go on overkill than you might end up having too many contrasting looks that creates disorganization.
5. Modify your tires.
Your tires give you plenty of customization options. Choose unique rims that improve your car’s look and take it a level up from the manufacturer’s design. Select from black, white, silver or chrome to draw attention to your rims.
Cars provide endless opportunities for customization. Show your personality by modifying the paint, changing the interior or by adding custom rims to your vehicle.
Your car is like a member of your family, and, like the rest of your loved ones, you only want the best for your car when something breaks or your paint starts to peel. Why recycle your car or sent to the car removals if it’s not needed?
Some paint jobs, however, can cost in excess of a thousand dollars, even for the simplest of colors and the smallest of cars. For those who can't afford to have an expensive paint job done on their car, a few affordable yet quality alternatives are available.
Some paint jobs, however, can cost in excess of a thousand dollars, even for the simplest of colors and the smallest of cars. For those who can't afford to have an expensive paint job done on their car, a few affordable yet quality alternatives are available.
Do-It-Yourself: Head to the Hardware Store
That's right. The hardware store isn't just for homeowners or contractors anymore. Many people who want to breathe new life into their vehicles can head down to the hardware store, pick up a few items, put in some quality hours in the garage and have it all done for under $100.
To begin, purchase some sandpaper, painter's tape, foam brushes, paint trays and primer spray paint. Depending on the size of your car, you may need to purchase between four and six quarts of paint. A good thing to remember when purchasing paint is that you will likely need to apply at least six coats of paint to your car before the job is done.
Once you have purchased all the supplies you need, begin the prep work. Remove any and all pieces that come off easily. Doing this will help you avoid any unnecessary cleaning that may arise should you accidentally paint any headlights or other parts that should be left untouched.
Next, thoroughly wash every piece of material that you plan to paint. Make sure your work area is clean and free from any extra debris. Dirt and grime that is left on the vehicle will cause a number of problems during the painting process.
Next you must mix your paint. Make sure the paint is mixed to the point where it looks and feels similar to milk. This will ensure that every part of the car is covered evenly and that there is no extra runoff after you are finished.
It is also important that you plan how you want to paint your vehicle. Keep track of every part of the vehicle that you have already painted and remember to evenly spread the paint over each section of the car.
While a significant amount of elbow grease is required for a decent paint job, doing it yourself certainly beats heading to Maaco to spend $1,500.
Rustoleum
Rustoleum offers a wide range of products for individuals looking to paint their cars at home.
Head to your local hardware or automotive store and pick up four quarts of gloss Rustoleum, four cans of Rustoleum primer spray paint, sandpaper, acetone, painter's tape, a spray gun and air compressor.
After you have completed the prep work, removed all necessary parts and cleaned the outside of your vehicle, you're ready to begin painting. If you plan on using a darker color for your car, make sure to apply a dark colored primer first. If you plan on using a lighter color for your vehicle, apply a light colored primer first.
After you have completed the job, you'll want to let the car sit for a few days to let the paint cure. Similar to using regular paint, this will set you back between $100 and $200, depending on the size of your vehicle.
Because Rustoleum products are exclusively made for automobiles, the process is relatively easy. Similar to other do-it-yourself jobs, you must have proper knowledge of how to use the products and what to do if you make a mistake.
Good Old Fashion Spray Paint
A few cans of spray paint can go a long way for someone who knows what they're doing.
Before you try this method, however, make sure you have had some training on how to properly use spray paint and have a backup plan in case it doesn't work out.
First, buy as much spray paint as you need from your local hardware store. Remove any parts of the vehicle that you don't plan on spray painting and set them to the side.
Next, remove the hood completely and spray paint it by itself. This will make the process much easier and will keep the engine clean. After the entire car has been painted, let it sit for a couple of days to cure, wet sand the exterior of the vehicle and then apply a coat of polish.
While this is a very affordable alternative to spending thousands of dollars at a local collision and paint center, it is a very risky process. You may end up using too much paint and may have to repeat the process multiple times to get the look you want.
Author Bio
Rebecca Smith’s is a car enthusiast that stems from working on cars with her Dad when you was just a young un’. She is interested in finding creative ways to reuse car parts or modify cars that are at the end of their years. In her spare time she runs a Car Removalist Company.
If you own a classic car, that fine piece of equipment is often classified as your baby. Just like you would take care of your little one, you need to make sure that you take time to take care of your classic car. Older cars, while they are classics with a great reputation, are more susceptible to having mechanical issues if they are not regularly maintained. To keep your car in tip top shape, here are 5 of the most common issues you may need to solve.
5 Common Car Maintenance Issues
Car leak are perhaps the most common problem reported by classic car owners. While these leaks can occur a number of different places, in classics made by all of the most respected manufacturers leaks generally occur around the valve covers, the main seals, and the crankshaft seals.
1. Valve Cover Leaks
If you know your way under the hood of your classic Mercedes you must also know that what is a valve cover, you do not necessarily need to schedule Mercedes repair to fix a valve cover leak. This repair can easily be made if you remove your valve cover and replace the old gaskets with new ones that will sit flat and prevent further leaks.
2. Main Seal Leak
If you are a classic car enthusiast but not necessarily a mechanic, you may need to schedule Mercedes service and maintenance to fix a main seal leak. Because this seal is located in a place that cannot easily be accessed, it takes a lot more knowledge and work to fix. In some cases, the transmission and the clutch will need to be removed to access the main seal.
3. Crankshaft Seal Leak
Also known as the harmonic balancer seal, the crankshaft seal is located at the front of the engine and may not require in-depth mechanical skills to repair. By purchasing a seal kit, you can remove the harmonic balancer and install the sleeve to stop the leaks in the crankshaft. While you will need to follow directions, there are plenty of instructions that can be found on the Internet for do-it-yourself repair.
4. Door and Window Seal Leaks
Oil leaks are not the only leaks you must worry about. Your door and window seals keep the outside elements out of your vehicle. If they are leaking, they have probably worn or cracked. The seals can easily be replaced with seals from the manufacturer or seals from an aftermarket parts company. Once you order the seals, you need to remove the old seals from the pins they are clipped in to install the new seals.
5. Fading Finish
Over time, the dirt builds up and causes your paint finish to fade. By using a mild soap designed for cars on a routine basis, and waxing and buffing your baby by hand, you can protect the finish and make your baby shine.
Maintaining your baby is all about identifying problems before they get serious. While some work must be performed by a professional, many problems can easily be fixed on your own.
Car restoration can be a very satisfying weekend hobby that can also become a lucrative side business. But in order to be able to have a car restoration project result in an enjoyable rather than a frustrating experience, it's important to have at least three essential tools handy before you begin any project.
Impact Wrench
The nuts, bolts and lugs attached to any vehicle, much less a vintage vehicle that may have been sitting around unused for years, will take some muscle power to be removed during the course of the restoration process. For safe and quick removal of any of these fasteners, make sure you have a good quality impact wrench. This piece of equipment, also known as a torque gun or air wrench, enables you to remove lugs, nuts and bolts using minimal physical exertion. They are available in sizes ranging from one-quarter inch up to three and a half inches.Angle Grinder
The second essential tool to have handy when doing car restoration is an angle grinder. This hand-held power tool is essential for cutting, grinding and polishing metal during the restoration process. Some models can also be fitted with a sanding disc in order to serve double duty as a sander.Oscillating Saw
The third essential car restoration project tool is an oscillating saw, also called a reciprocating saw because its cutting action is facilitated by a push and pull motion of the blades. Its fast side to side motion makes a quick job of cutting through thick metal as well as being able to do reach into tight spots where cutting action is needed. Cordless models give you even more flexibility and it's a good idea to invest in an oscillating saw that features alternate blades as well as sanding pads for even more versatility.Before starting any car restoration project, make sure your jack and stands for lifting the vehicle off the ground are sturdy and reliable so you are completely safe anytime you are working under the vehicle. A reliable creeper also lets you move around underneath the car much more easily. An air compressor is a smart investment, since tools such as impact wrenches and grinders need this to provide adequate power.
Depending upon the complexity of your car restoration project, the tools you currently own may not be optimal for your needs. So take inventory before you begin and do a little online research to judge whether the essential tools mentioned above offer you the features and capabilities you'll need for your particular project. If you're a car restoration novice, ask other buddies who have more experience to recommend those specific tool models they give high performance ratings to and check out online product reviews to determine their ease of use and performance before purchasing them.
Author Bio
Lyndsi Decker is a freelance writer and is currently promoting Multi Tool Blades. She enjoys restoring cars and often blogs about it. In her free time she enjoys road trips with her husband.
If you are unhappy with the stock engine that came with your vehicle, then there is a good chance that you are considering the option to upgrade it. Of course, this is something that will require you to put a significant amount of money into the car itself. Furthermore, it will require some labor and time. However, if you follow the steps outlined in this article, you can modify your engine to get the most out of it in no time.
Research engine upgrades for your car.
Depending on the specific vehicle you drive, there is a good chance that there will already be some upgraded engines available. Try doing some research online to find out what the most common engine modifications are for your vehicle. A lot of times, you can read about this on car discussion forums, which are typically authored by vehicle owners just like you. You may even want to join in the discussion and ask questions as you go along.Consider your experience.
Have you worked on engines before? If so, then you may be able to save money by performing the modifications yourself. Otherwise, you will likely want to hire a professional for the job. After all, modifying an engine is a complicated process and can be very expensive to repair if you mess anything up.Pick out a turbo kit.
Depending on how much power you want your upgrade engine to have, you will want to choose a turbo kit or other upgrade for your engine that meets your needs. You can buy these online through a number of car part retailers, or you may even be able to get a discount by ordering through your local repair and engine work shop.Hire a professional or buy necessary tools.
Once you have the parts you need, take your car and the kit to a professional to have it installed. Or, if you plan on doing the repairs yourself, then be sure that you have the proper tools to do so. This includes everything from wrenches and jacks to spherical roller bearings which you can get from statewide bearings. After all, without the right tools, you will not be able to complete the installation properly.Test the new engine.
Be sure to run diagnostic testing on the engine before you take it to the streets for the first time. This will ensure that it runs properly, does not overheat, and has the right amount of power.About the Author:
Madyson Grant enjoys working on her car and getting the best performance out of it that she can. She is currently blogging tips for improving the quality of automobiles.
The value of a car generally goes down approximately 65% after about 5 years of normal driving. Once you have decided to purchase a new or newer car it is tempting to quickly settle for the best offer you can get on your old car. Before hastily putting a "for sale" sign on the back window and placing an ad in the local newspaper, you should take advantage of a few simple and fairly inexpensive tips that will enable you to get several hundred dollars more than you otherwise would. There are other things that you should always be doing in preparation for the time when you will want to sell your car.
Washing and Detailing
Although this should be obvious, it is amazing how many people neglect to do it. Improving the appearance of a car both inside and out will greatly improve its perceived value. Your vehicle may be in superb mechanical condition, but if it doesn’t look clean and polished the car’s resale value might take a hit. It is well worth the investment of detailing and washing the car, regardless of whether you do it yourself or have a professional do it.
Limit Upgrades
Strangely enough, upgrades often decrease a cars resale value. For instance, adding a custom stereo system probably seems like a good idea, but modifications usually lower a car’s resale value. If you do upgrade your vehicle, you should keep the original parts so that it can be easily reverted to the original factory condition. Many experts suggest that you resist the urge to customize if you want to get top dollar when you sell the vehicle.
Keep your Car in the Garage
If you live in an area with harsh climate and severe weather, you should keep it in a garage. If you don't have a garage, consider using a car cover. This will make a huge difference in how your car looks.
Maintenance
Maintenance
One of most important and practical things you can do to maintain top resale value on it is to strictly adhere to the maintenance schedule including regular oil changes per the guidelines in the operator's manual. Be sure to document all of these things. A shrewd buyer will be as concerned with the mechanical condition of the vehicle as they are with the looks of the exterior.
Repair all Known Issues
Used car buyers love hearing that they’re buying a car with new parts. It instills trust when the seller is willing to spend money on repairs even though they won’t personally benefit from them. Whether it’s a new set of tires, seat covers, windshield wipers or spark plugs, these repairs give the impression that all known issues have been fixed and the car won't be in need of immediate service.
As simple as these things are, they will make a huge difference in being able to sell the car for the highest possible price. You can usually get more money for your car by selling it yourself rather than using it as a trade-in on your next car purchase. When you purchase your new car, be sure to choose one that holds its resell value well.
Author's Bio:
Marc Tuttle is the Manager of Internet Marketing at Seat Covers Unlimited. Visit our site to view seat covers by Seat Covers Unlimited.
The economic recession is one of the main causes for the development of used cars market. Nowadays, most of the individuals opt for buying used or pre-owned vehicles because according to them, it is not practical to spend on new autos when the economy is not in a good shape. If you are also considering purchasing a pre-owned car then it is good to check out some of the most significant aspects before actually finalizing the deal.
The very first thing that you should consider before buying used car is your budget. Now, after deciding your budget, next thing to consider is the size that directly depends on the number of persons you have within your family.
After preparing the list of cars you are considering for, you must pick a good dealer who has used cars of the selected models. Once you have short-listed the cars, next task you have to do is to check the years of registration of the cars. Purchasing a vehicle that has run almost more than 17,000 Kilometers is not worthwhile. While carrying out such task always remember to check the functioning of odometers.
Take a test drive along with your own mechanic; it will enable you to check the various parts including the engine plus the transmission whether they are functioning properly or not. In some countries such as the United States, you can avail Car Fax reports & from them, you can further find out the complete history of the automobiles. Through these reports you can also check out the particulars of the accidents if any. Car Fax reports also tell the service history of the cars.
You should always keep in mind to monitor the cooling system, the radiator, the alternator & the starter of the automobile, especially the second hand car. The radiator should be free from any kind of leaks. The working of the Brakes should also need to be monitored. It is always recommended that you should visit the dealer with your own mechanic.
Nobody desires a very cheap auto but at the same time one cannot actually go very far. It is then very much essential that one should inspect autos’ general condition before actually purchasing it. Numerous things that include the make, design, model, & color should only be less important. If you want to buy used or second hand cars, you must consider its functionality as well as affordability!!!
The very first thing that you should consider before buying used car is your budget. Now, after deciding your budget, next thing to consider is the size that directly depends on the number of persons you have within your family.
After preparing the list of cars you are considering for, you must pick a good dealer who has used cars of the selected models. Once you have short-listed the cars, next task you have to do is to check the years of registration of the cars. Purchasing a vehicle that has run almost more than 17,000 Kilometers is not worthwhile. While carrying out such task always remember to check the functioning of odometers.
Take a test drive along with your own mechanic; it will enable you to check the various parts including the engine plus the transmission whether they are functioning properly or not. In some countries such as the United States, you can avail Car Fax reports & from them, you can further find out the complete history of the automobiles. Through these reports you can also check out the particulars of the accidents if any. Car Fax reports also tell the service history of the cars.
You should always keep in mind to monitor the cooling system, the radiator, the alternator & the starter of the automobile, especially the second hand car. The radiator should be free from any kind of leaks. The working of the Brakes should also need to be monitored. It is always recommended that you should visit the dealer with your own mechanic.
Nobody desires a very cheap auto but at the same time one cannot actually go very far. It is then very much essential that one should inspect autos’ general condition before actually purchasing it. Numerous things that include the make, design, model, & color should only be less important. If you want to buy used or second hand cars, you must consider its functionality as well as affordability!!!
About The Guest Author:
Sofia Williams writes for www.lahondaworld.com. She is a freelance content contributor and likes to write about various spheres like Social Media, technology trends and her secret favorite – cars and automobiles. She is a keen observer and contributor for various auto forums and the online auto space.
Don’t Let Your Car Rust
One day suddenly you find some rust on your car. Rusting occurs when iron or the steel reacts with water with the heat and the salt in the air.
Don’t worry if the rust is at a small place, under the car or at a place where it does not show. The paint is not only for the car to look nice but also prevents rusting. You should be careful in case there is a scratch as that could lead to a bigger repair problem. Make sure you keep your car away from oxidation.
How do you notice the rust?
• When you clean or wash your car, check for rusting in the wheel wells and all the corners.
• Look around the car antenna, mirrors, moldings, trims, under the car body with a torch or some light.
• If you stay near the sea or the ocean or where it rains a lot check the metal of the car regularly for rusting.
• Ask your service mechanic to properly check under the car for rusting when the car is on the hoist.
• Look around the car antenna, mirrors, moldings, trims, under the car body with a torch or some light.
• If you stay near the sea or the ocean or where it rains a lot check the metal of the car regularly for rusting.
• Ask your service mechanic to properly check under the car for rusting when the car is on the hoist.
Observations:-
• You might find the paint is darker at some places …… might be that it is rusted below the paint.
• If you have a scratch or a place where the paint has come off, apply the paint and don’t let it rust.
• Use the rust removers at the pitted areas.
• Rust settles at place where there are salt deposit and dirty places.
• If you have a scratch or a place where the paint has come off, apply the paint and don’t let it rust.
• Use the rust removers at the pitted areas.
• Rust settles at place where there are salt deposit and dirty places.
How to handle the rusting:-
• Rub sandpaper or a razor at the rusted area. Be careful you do not spoil the paint around the rusted area. You could use a brush to dust the scraped rust.
• Apply the rust resistor so that the rust does not spread further.
• Then paint it with a brush or a spray gun depending on the area after applying primer.
• At some places where the rust is really bad and you need to change that area, take an estimate from the mechanic and decide if it is worth the money spent keeping the life of the engine in mind.
• You can use the rust removing equipment available
• Apply the rust resistor so that the rust does not spread further.
• Then paint it with a brush or a spray gun depending on the area after applying primer.
• At some places where the rust is really bad and you need to change that area, take an estimate from the mechanic and decide if it is worth the money spent keeping the life of the engine in mind.
• You can use the rust removing equipment available
How to avoid rusting
• Wash your car once in 2 weeks and maybe once a week where there is salt in the air .
• Every six months you should wax your car.
• Make sure that you clean your car from inside as sometimes spilled things can start rusting.
• Wash your car properly under the car and in between the wheels.
• You could use the rust preventing sprays if you live at places which have salt in the air, like the areas near the oceans and seas.
• Keep your car dry as far as possible.
• Cover your car if the car stays more in the open.
• Try to keep the car indoors
• Always clean the rust the minute you notice it.
• Applying the primer with the machine electrically run, has a better and a long lasting result.
• Every six months you should wax your car.
• Make sure that you clean your car from inside as sometimes spilled things can start rusting.
• Wash your car properly under the car and in between the wheels.
• You could use the rust preventing sprays if you live at places which have salt in the air, like the areas near the oceans and seas.
• Keep your car dry as far as possible.
• Cover your car if the car stays more in the open.
• Try to keep the car indoors
• Always clean the rust the minute you notice it.
• Applying the primer with the machine electrically run, has a better and a long lasting result.
You can save your car from rusting and causing major damage by checking it regularly and repairing the rust the minute you observe it.
Author Bio :-
John Polk writes for www.markkia.com. He is a freelance content contributor and likes to write about various spheres like Social Media, technology trends and his secret favorite – cars and automobiles. He is a keen observer and contributor for various auto forums and the online auto space.
 |
| Car Modification - Hemi 426 Engine Rebuild |
When Chrysler first introduced the hemispherical combustion chambered engine in the early 1960s, it was groundbreaking. Originally designed for performance on the racetracks, the Hemi 426 proved so successful at its original intent – in its first appearance at the Daytona 500 in 1964, Richard Petty used a Hemi engine to take the checkered flag – that soon there was a sizable demand for street machines with Hemi engines.
While the racing success came early and often, and dealers were able to sell a respectable amount directly to street consumers, the early 70s marked the end of the Hemi 426, as most racing circuits outlawed the engine and Chrysler discontinued production in 1971.
Fast forward almost 20 years, and the Hemi made a comeback, albeit in a slightly different form. Seeking an engine with ample power and torque, Chrysler reinvented the timeless engine and began installing the Hemi engines in their Dodge pickup line, sparking new interest in the classic model.
Since that time, classic Hemi vehicles have become highly sought-after; there were roughly 10,000 Hemi cars produced between 1964 and 1971 at a cost of $3000 to $4000 each, and now they are among the most valuable collector vehicles in existence.
Meanwhile, restoration enthusiasts and engine builders have increasingly turned their focus on the original Hemi 426, not just for its racing prowess, but also as a durable and reliable engine for cars, trucks, boats and hot rods alike.
For many gearheads, nothing can match the flair and performance of having a classic Hemi under the hood. However, there are some considerations that a builder must make before embarking on a Hemi 426 rebuild. Perhaps the most crucial consideration is cost; Hemi rebuilds are generally more expensive than other 1960s engines, owing mostly to the difficulty in obtaining the specific parts needed.
The cost can vary wildly, however, and some Hemi rebuilds can be done for a few hundred dollars. Others, however, can cost as much as $1,500.
The disparity has to do with the adaptability of the original 426s. While stock Hemi 426 parts are widely available and generally reasonably priced, modified versions can be more of a chore to deal with. And many of the original Hemi 426s were modified, whether for racing or a customized street version.
Original Hemi 426 parts can still be found with minimal effort, both for stock engines and modified versions – with one notable exception being the DeSoto models, for which parts are extremely scarce. However, knowing which specific parts are needed when dealing with an engine that has been modded (and often machined) is the tricky part, and while many parts are interchangeable between the various versions, care must be taken to ensure that all parts are compatible. The good news is that interest in restoring the 426 has led to an upsurge in manufacturing parts specifically designed for rebuilds – the downside to this is that there are so many parts available, it can be difficult to determine which one is correct for your rebuild.
Because of the extra knowledge needed to effectively study the engine components and ensure part compatibility, and the potential for bigger costs to find a rare part, Hemi 426 rebuilds are recommended primarily for those that have experience restoring other classic engines. The difficulty of actually rebuilding the engine is not so great, but failure to properly match parts can ruin the experience, so proceed with caution.
The Hemi 426 is one of the greatest production engines every produced, and its staying power in the collector/rebuild world is staggering. Many builders are specifically seeking out the Hemi because of its rediscovered reputation as a classy and powerful engine. If you are looking for a challenging and rewarding restoration project – one that will ensure that your friends and family can give you no guff – then it is hard to go wrong with an engine that has had such a huge influence (despite limited early production) as the Chrysler Hemi 426.
Author Bio:
Roger Morrison is a classic car enthusiast and an off-road aficionado that has recently taken to blogging to share his passions with others. His current project is as an online publisher for Chrysler Australia.
Are you in love with your car? Im sure you are , then why don't you pamper it with car
care products invented to suit your love.
I am sure you want your love to look clean and admirable all the time. So, why don't you invest in the latest cleaning innovations in car care products that are created to leave your car spic and span.
Car care products include cleaners and tools which can give your car a clean and fresh appeal. Latest solutions and tools are fabricated to serve your delicate car exterior and interiors. Car interiors often get accumulated with dirt and dust, which can get difficult to clean. To serve your delicate car interiors many cleaning products, tools and solutions are created to shine your cars delicate detailing.
Delicate car interiors require you to be armed with tools and cleaning techniques to serve the intricate detailing of car interiors. Upgraded Interior and plastic cleaners help you remove the stubborn dust from the impacted corners. Interior car pampering requires you to clean, protect and dress the fine detailing. Latest inventions in the car pampering field help to serve your cars leather seat and upholstery from getting impacted. Make sure that you shelve a little to invest in a protectant, as it helps to retain the life of your car. Then to give it a final touch, dressing is required to maintain your car leather and vinyl.
Leather of your car seat must be properly cared to retain its beauty. So, if you want your car upholstery to get the 'waoh' factor condition and clean it with a suitable product. Conditioners, as the name implies conditions and leaves your upholstery soft and clean.
If you want to make heads turn then do care to spend time on your car exteriors. They give the first impression to the lookers. The three step formula to achieve cleaning care exterior cleaners that help in washing, polishing and waxing. Car shampoos are there to do the cleaning job. They help in wiping of particles and dust off your car body. Car polish and wax helps you achieve a shiny and spotless car finish. Glass cleaners and wipes are improvised to give your car a perfect look. They reach out to the glass windows easily and help in maintaining the delicate glass exteriors.
Tires and wheels are the tough areas to clean. But, not anymore as the inventions in cleaning components have made it easy. Cleaning products help you wash the tough exteriors but make sure you choose the appropriate ones to suit your wheels.
Maintenance products and Accessories are created to protect and care for your vehicle. Maintaining your car requires to protect it from unknown impacts. Seasonal maintenance requires you to constantly check on the batteries and tires. Care to wax your car when required. Have a check on the AC and cooling equipments to safeguard unknown incidents.
Air fresheners are a must to remove odor. You might smell good but what about your car. Car fresheners leaves a good fragrance and eradicate odor. They are a must have to make your journey pleasant and memorable.
Hi i am anna lee working for car studio as a marketing head. Car Studio is leading provider of car body covers india and premiere car care products in India.
care products invented to suit your love.
I am sure you want your love to look clean and admirable all the time. So, why don't you invest in the latest cleaning innovations in car care products that are created to leave your car spic and span.
Car care products include cleaners and tools which can give your car a clean and fresh appeal. Latest solutions and tools are fabricated to serve your delicate car exterior and interiors. Car interiors often get accumulated with dirt and dust, which can get difficult to clean. To serve your delicate car interiors many cleaning products, tools and solutions are created to shine your cars delicate detailing.
Delicate car interiors require you to be armed with tools and cleaning techniques to serve the intricate detailing of car interiors. Upgraded Interior and plastic cleaners help you remove the stubborn dust from the impacted corners. Interior car pampering requires you to clean, protect and dress the fine detailing. Latest inventions in the car pampering field help to serve your cars leather seat and upholstery from getting impacted. Make sure that you shelve a little to invest in a protectant, as it helps to retain the life of your car. Then to give it a final touch, dressing is required to maintain your car leather and vinyl.
Leather of your car seat must be properly cared to retain its beauty. So, if you want your car upholstery to get the 'waoh' factor condition and clean it with a suitable product. Conditioners, as the name implies conditions and leaves your upholstery soft and clean.
If you want to make heads turn then do care to spend time on your car exteriors. They give the first impression to the lookers. The three step formula to achieve cleaning care exterior cleaners that help in washing, polishing and waxing. Car shampoos are there to do the cleaning job. They help in wiping of particles and dust off your car body. Car polish and wax helps you achieve a shiny and spotless car finish. Glass cleaners and wipes are improvised to give your car a perfect look. They reach out to the glass windows easily and help in maintaining the delicate glass exteriors.
Tires and wheels are the tough areas to clean. But, not anymore as the inventions in cleaning components have made it easy. Cleaning products help you wash the tough exteriors but make sure you choose the appropriate ones to suit your wheels.
Maintenance products and Accessories are created to protect and care for your vehicle. Maintaining your car requires to protect it from unknown impacts. Seasonal maintenance requires you to constantly check on the batteries and tires. Care to wax your car when required. Have a check on the AC and cooling equipments to safeguard unknown incidents.
Air fresheners are a must to remove odor. You might smell good but what about your car. Car fresheners leaves a good fragrance and eradicate odor. They are a must have to make your journey pleasant and memorable.
Author Bio:
Hi i am anna lee working for car studio as a marketing head. Car Studio is leading provider of car body covers india and premiere car care products in India.
I purchased my first car on a cold day in January at the age of 16. It was a red 1969 Mustang coupe, picked up for $1,800, and I still drive her to this day. The search for my first car lasted over a year, while I worked to save up my money. During that time, there were many makes and models of old cars—I knew I wanted a classic—which I looked at and test-drove. While I was still not certain what car I would end up buying, there was one requirement that I had to adhere to by order of my parents: I could not have a V8. Safety, insurance, the fact my parents actually knew the damage I was capable of were all reasons for this call.
Resolved to this fact, I knew I would have to make due with whatever I could get my hands on. I ended up with the Ford 250ci straight six, and hopes of one day swapping her out for something with a bit more sauce once I had finished her restoration and left home. For the time being, in an effort to hide my shame of rocking a six-banger, I installed a set of split headers from Clifford Performance, complete with a pair of 40 series Flowmaster mufflers. A cutout rear valance with dual tipped pipes added to the effect, and people continue to be fooled and shocked when I tell them it’s a six. I say still, because after a few more modifications I decided to stick with the original engine and continue with the shock factor of putting eights to the test.
The first thing to do is getting acquainted with your online resources. The two I have found to be the most productive for my six-cylinder needs are Clifford Performance—where I bought my headers all those years ago—and Classic Inlines. Both of these companies’ sites have articles, how-to’s, photo galleries, dyno results, and engine parts. I would say familiarizing yourself with the products both companies offer is key prior to making any plans for that rebuild. Of course, knowing what you want from your car modification is key at this point as well; are you still wanting a daily driver with average fuel economy and some nice pep, or are you striving for an 11 second drag machine?
If you are a true gear head, you may end up doing the modification yourself. If not, make sure you have a mechanic who knows a thing or two about this sort of modification. Not only is this an uncommon task—especially in the States—but the average mechanic might not be as well versed in working on old inline sixes. Shop around for your guy, and think about getting him involved from the very beginning, and not when you finally have all your parts and are ready to go. Odds are, your mechanic will be pretty stoked about taking on such a unique project—unless, of course, you find someone who does the mod frequently.
The number one issue with modifying the Ford straight six is the unfortunate problem with the intake manifold. Sadly, the Ford 170-200-250 intake manifold was cast as part of the head, meaning it cannot be swapped out. There are kits that allow you to bore into the manifold to add extra carburetors, but this method has always seemed sloppy to me, and obviously irreversible. The Ford Australian six, however, does have a detachable manifold, and these heads are very popular for inline modification. The only problem is—living in America—these heads are very difficult to come by, and even if you buy the head from Australia, the shipping will kill.
A more viable option is to simply purchase an aftermarket head from Classic Inlines. Not only will you then have the option to swap out manifolds, but they also have an aluminum head to make the purchase all the more worth it. Odds are, even with the Aussie head you would perform a complete rebuild, and with the aftermarket you can just order it with the new add-ons already there for you. Performance rods, rocker arms, and springs are all elements with will help beef up the power-potential of your head.
Classic Inlines has you just about covered in all aspects of your car modifications. Their master rebuild kit will get you where you need to go, and I highly recommend going that route over building up the parts one by one. They have several options that allow you to completely customize your package. At this point, it is really important to have done your research and know exactly what you want, and hopefully know what your mechanic recommends; because there is a good chance he still knows more about it than you do, even if this is his first six modifications.
In the case of my ’69, I opted with the C.I. Aluminum 250-4v head from Classic Inlines, also adding the Clay Smith S294-122 Camshaft and Lifters, SI 1.86/1.56 Valves, the Yella Terra 1.65 Roller Rocker Kit, and a Romac High Performance Balancer. I decided to go bold, and skipped the carb, going with EFI fuel injection instead—giving me great mileage and performance. I still make about 24 MPG, and dyno’d at 256 HP and 401 lb/ft of torque. At a recent car show, they had a 150 ft drag strip set up for us, and I completely blew the doors off of my brothers ’71 351-4v Mach 1.
The common fate of most six cylinder classics—particularly mustangs—is to gut it and drop in the eight. Hopping up the old six was a blast, and is such a unique addition to the story of your ride. At car shows, my ’69 gets unbelievable amounts of attention because people have never seen a six dressed up in such a way. She performs well on the road, while also getting my better fuel economy than I probably could have expected from a stock 302. At the same time, it gives me a sense of satisfaction knowing the heart that beats under the hood is the same one that was dropped in on day one.
Author Bio:
Jack Payton is a car nut in the purest form. He loves to write about everything gear related, and rebuilt his first engine at 15. He works as the online publisher for the online tire retailer tires-easy.com. In his spare time he enjoys cruising, attending car shows, and collecting vinyl.
Despite the global economic slowdown and rising fuel prices continuing to hit the country, several people opt to keep their cars in good running condition. Even if the car requires major repair work, most people get it done instead of purchasing a new vehicle. Although you save up money by not buying a new vehicle, you will have to spend an additional amount on repair and maintenance work of your old vehicle. This requires you to find a good, trustworthy auto repair shop.
Finding the best and most trusted auto repair shops is very important, particularly at a time when you are stranded on the road with a car that is not at all functioning. At such a time, people generally look for an auto repair shop at the vicinity. However, if there is no good auto repair shop nearby, it is always better to hire a good mechanic, who will ensure that your car is in good running condition.
For those residing in Mitchell, a small township in Australia, if your car breaks down you can look for a service centre Mitchell nearby. Here are a few tips that will help in selecting the best auto repair shops.
• Before deciding to get your car repaired, it is important to ensure that the repair shop you choose is certified. The mechanics must be highly experienced to deal with major repair works.
• Find out if the car repair shop has good references. Know if the car repair shop is reputed by reading reviews in magazines and online. Family members, friends and colleagues will best advice you about their experiences with the shop.
• In order to get the best car repair done at an auto repair shop it is a good idea to find out repair shops offering services at affordable rates. If your car requires extensive repairs, some mechanics ask you to pay a nominal fee. However, most of the mechanics include the fee in the overall repair work. It is therefore always better to enquire about the fees before taking your car to the shop.
• In most cities, car repairs can be quiet expensive and the labour involved in repairs adds up to the cost. In order to get better deals on your car repair you must opt for repair shops offering affordable rates. Car Repair Mitchell is one of the most reliable and affordable repair centres in Mitchell, Australia.
• Extreme heat and cold can cause extensive damage to the batteries of your car. You may end up buying incorrect battery for your car if you do not consult a mechanic. This can damage your car further and is a sheer waste of money. It is always to get your batteries replaced by relying on car repair service.